Give a cold garage electrician-installed, whole-space heat with 7,500 watts and remote control.
Ships to the lower 48 states with tracking.
A cold garage stops feeling like storage once real, whole-space heat reaches every corner.
At a Glance
-
Heat output: 7,500W, 25,589 BTU
-
Airflow: Vertical and horizontal direction control
-
Control: Remote control included, 2 power settings
-
Auto-off: 8-hour timer plus thermal cutout
-
Finish: Matte black steel housing
This 7,500-watt wall heater turns a cold garage or workshop into space you can actually use, throwing 25,589 BTU of directional heat from a permanently mounted matte black unit. An included remote lets you switch between two power settings and redirect airflow vertically or horizontally without leaving your workbench.
Key Features
-
7,500W of directional heat: 25,589 BTU output warms a garage, workshop, or barn fast, with vertical and horizontal airflow so you can point the heat where you're working.
-
Two power settings: Step down output on milder days instead of running full blast the whole time.
-
Remote control included: Adjust settings from across the garage without walking to the unit (2 AA batteries needed, not included).
-
Built-in overheat thermal cutout: Automatically shuts the unit off if internal temperatures run too high.
-
8-hour auto-off timer: Set it and walk away, no need to remember to shut it down at the end of the night.
-
Adjustable thermostat: Hold a target temperature instead of leaving the heater running at full output.
-
Matte black steel housing: A finish that reads more like shop equipment than a plastic space heater.
What's Included
In the box: one Vie Air 7500W wall heater unit, mounting hardware, and a remote control (2 AA batteries required, not included); electrical hookup wiring and a licensed electrician's labor are not included.
Before You Buy
-
This is a 240V hard-wired heater, not a plug-in unit. A licensed electrician must connect it to a dedicated 240V circuit per local code before it can run, so budget for that install cost separately.
-
This is a 240V hard-wired heater. Have a licensed electrician confirm the circuit and handle the install.
-
It weighs 23.4 lb and mounts to a wall, not the floor. Plan the mounting location before delivery arrives so your electrician isn't guessing at the job site.
Perfect For
- Detached garages that need real heat during a winter renovation project
- Workshops where a hardwired heater outlasts portable space heaters run daily
- Pole barns and outbuildings already wired for a 240V circuit
- Homeowners upgrading from an underpowered plug-in heater to whole-space output
- Garage gyms that need consistent heat through a cold workout session
Care & Use
- Have a licensed electrician handle installation and wiring to a dedicated 240V, 30A circuit.
- Keep the mounted unit clear of stored boxes, paint, and other flammable materials.
- Wipe the matte black housing with a dry cloth; don't spray cleaners directly on the vents.
- Replace the remote's batteries (2x AA, not included) if it stops responding.
- Test the 8-hour auto-off timer and thermostat after installation to confirm proper operation.
Shipping
Ships as a wall-mount unit ready for your electrician to install; hookup and wiring are handled on-site, not in the box. Ships fast from CurbGo with tracking.