MegaMounts GMW863 Full Motion TV Wall Mount for 32 to 70 Inch TVs, Black, Dual Articulating Arm, VESA 600x400, 110 lb, 18.7 in Extension

Pull the TV off the wall, swing it toward the couch, and push it back flat when the show is over.

At a Glance

• Screen range: 32 to 70 in TVs up to 110 lb
• VESA patterns: 600 x 400 mm and smaller
• Extension: Dual articulating arm reaches 18.7 in from the wall
• Tilt and swivel: Tilts down 20 degrees, up 10, swivels 180 degrees
• Wall plate: 25-5/8 in wide, fits 16 in and 24 in wood studs

The MegaMounts GMW863 is a full motion wall mount for 32 to 70 inch TVs that lets you extend, swivel, and tilt the screen instead of leaving it fixed to one wall. A double articulating arm reaches 18.7 inches out, turns up to 180 degrees, and tilts 20 degrees down to kill glare, all on a steel wall plate rated for 110 pounds.

Key Features

• Dual articulating arm: Two hinged sections extend the TV up to 18.7 in from the wall and fold it back flat, so a corner or off-center wall still gives a straight-on view.
• 180 degree swivel: Turn the screen toward the kitchen, the dining table, or the exercise bike, then swing it back when you sit down.
• Tilt to beat glare: Tilt the screen 20 degrees down or 10 degrees up to angle away from windows and lamps, and to point down at the couch from a high mount.
• 110 lb, VESA to 600 x 400: Rated for 110 lb and hole patterns as large as 600 x 400 mm, which covers most 55 to 70 in TVs from the major brands.
• Wide wall plate for two studs: The 25-5/8 in plate spans standard 16 in and 24 in stud spacing, so the load is split across two studs instead of one.
• Hardware and manual included: Lag bolts, TV screws, and the instruction manual ship in the box, so a stud finder and a drill are all you add.
• Steel build, black finish: The steel arms and plate carry the load, and the black powder finish disappears behind the screen.

What's Included

In the box: one MegaMounts GMW863 full motion wall mount (wall plate, dual articulating arm, and TV bracket), one mounting hardware kit, and one instruction manual.

Before You Buy

• Measure your TV's VESA pattern: this mount tops out at 600 x 400 mm and 110 lb. Many 65 and 70 in TVs use 400 x 400 or 600 x 400 and fit fine, but some use 600 x 600 or larger and will not attach. Check the hole spacing on the back of your TV before ordering.
• The wall plate is 25-5/8 in wide and needs 16 in or 24 in wood-stud spacing. The included hardware is for wood studs only. Single-stud, metal-stud, drywall-only, and masonry installs need different anchors that are not in the box.
• It extends 18.7 in and is not a low-profile flush mount. Even folded, the arm holds the TV off the wall. If you want the screen pressed flat, a fixed or tilt-only mount is the right choice.

Perfect For

• Living rooms where the TV sits in a corner or off to one side of the seating
• Kitchens and open-plan spaces that want to swing the screen toward the table
• Bedrooms with a TV mounted high that needs to tilt down toward the bed
• Home gyms where the screen turns to face the treadmill or bike
• Rooms with big windows where tilt and swivel cut afternoon glare
• Upgrading a 55 to 70 in TV from a fixed mount to full motion

Care & Use

• Locate two wood studs 16 in or 24 in apart with a stud finder and mark the centers before drilling.
• Confirm your TV's VESA pattern is 600 x 400 mm or smaller and its weight is 110 lb or less.
• Attach the bracket to the TV with the included screws, then hang it on the arm with a second person.
• Tighten the tilt and swivel joints after installation so the screen holds its position.
• Route cables with enough slack for the full 18.7 in extension so nothing pulls loose when you swing the TV.
• California Proposition 65 warning: this product can expose you to lead, see p65warnings.ca.gov.

Shipping

Your MegaMounts wall mount ships boxed with the arm assembly, hardware kit, and manual packed together. Ships fast from CurbGo with tracking.