Neck held at the top
Leaning toward a screen for hours strains the neck. The head pillow gives it a soft place to rest when you sit back, so shoulders loosen up between intense rounds and long calls.
Reclining Gaming Chair with Head and Lumbar Pillows, 250 lb Capacity, High Back, Black and White Trim, GameFitz GF-2101
A sharp black and white gaming chair with head and lumbar pillows and a reclining back for long, comfortable sessions.
$215.99$280.99CurbGo Savings: Save $65
- 250 lb capacity
- Head and lumbar pillows
- Reclining back
- 20 x 20 in seat
- 40 lb chair weight
Estimated arrival
Enter your ZIP for a delivery date
Ships to the lower 48 states with tracking.
Why buy from CurbGo
- Risk-free 30-day returnsUnused, in the original packaging
- U.S.-based home goods retailerReal U.S.-based support, before and after
- GameFitz warrants the chair free of defects in material and workmanship for 90 days from purchase for the original buyer, and replaces a defective item with the same or a comparable one. Normal wear, misuse, and alteration are not covered.View Gamefitz's warranty ↗ Hover for the manufacturer's policy
A compact racing frame that puts its support where long sessions fail first: the neck and the lower spine
At a Glance
- Black with white trim: a clean two-tone look that suits a game room or a home office
- Head and lumbar pillows: support for your neck and lower back through long sessions
- Reclining back: lean away from the desk between rounds
- 250 lb capacity: rated for everyday use by teens and adults
- 20 x 20 in seat: a roomy cushion with polyester fill
A gaming chair should look sharp and still feel good three hours in. The GameFitz GF-2101 pairs black faux leather with crisp white trim, then adds a head pillow and a lumbar pillow to keep your neck and lower back supported. The back reclines when you want a break, a gas lift sets the seat height, and five wheels roll it up to the desk. The 20 by 20 inch seat holds up to 250 pounds. This model has no footrest, which keeps the chair compact under a desk.
Key Features
- Two-tone racing look: black pleather with white trim stands out in a game room yet stays neutral enough for an office.
- Head pillow: rests your neck at the top of the tall backrest so your shoulders can relax.
- Lumbar pillow: fills the curve of your lower back to help you sit tall through long matches.
- Leans back on demand: the tilt mechanism lets the back recline for a quick stretch between rounds.
- Adjustable seat height: a gas lift raises or lowers the cushion to meet your desk and monitor.
- Wipe-clean finish: faux leather cleans up with a damp cloth after snacks and spills.
What's Included
In the box: one GameFitz GF-2101 gaming chair (backrest, seat, two armrests, base, five wheels, tilt mechanism and gas lift), a head pillow, a lumbar pillow, assembly hardware with tools, and an instruction manual. There is no footrest on this model.
Before You Buy
- This model has no footrest. If you want a leg rest that slides out, choose the GameFitz footrest gaming chair instead.
- Assembly is required. The chair ships in parts with tools included, and the assembled chair weighs 40 pounds.
- It is 26 inches wide. Check the opening under your desk so the chair can roll all the way in.
Perfect For
- A black and white gaming or streaming setup
- Home office desks that need neck and lower-back support
- Dorm rooms and bedrooms with a compact desk
- A gift for a gamer upgrading from a kitchen chair
Care & Use
- Wipe the faux leather and white trim with a soft cloth and mild soapy water, then dry it.
- Keep the chair away from direct sun and heaters so the white trim stays bright.
- Return the back to upright before you stand up.
- Snug the base and armrest screws every few months.
- California Prop 65 warning: this product can expose you to chemicals including DEHP, which is known to the State of California to cause cancer and/or reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Shipping
Your order is packed with care and tracked door to door. Ships fast from CurbGo with tracking.
Shop this styleGaming
Support placed where fatigue starts
Lumbar filled, posture held
Most chairs leave a gap behind your lower spine. The lumbar pillow fills that curve and nudges you into a taller posture that is easier to hold through a full evening of play.
Tight footprint, sharp trim
Without a footrest under the seat, the GF-2101 keeps a tidy profile. The black and white trim reads sharp on camera and fits a bedroom desk as easily as a game room.
Key specs for a compact setup
Three figures cover capacity, height and support.
250 lb
Weight capacity
51.5 in
Overall height
2
Support pillows included
Compact racing chair versus footrest model: what you gain in floor space
vs. a footrest gaming chair
A footrest model needs extra room in front. This one skips the leg rest for a tidier footprint at a small desk.
vs. a basic task chair
A task chair rarely includes pillows. This one ships with a head pillow and a lumbar pillow for neck and back support.
vs. a gaming floor rocker
Floor rockers sit too low for a desk. This chair rolls on five wheels and its gas lift raises you to keyboard height.
Sized for a compact desk
Measured assembled with the back upright.
- Overall
- 26 in W x 26 in D x 51.5 in H
- Seat
- 20 in W x 20 in D
- Chair weight
- 40 lb
- With no footrest, the chair needs only its 26 inch footprint plus room to roll back from the desk.
- Leave a little clearance behind the chair so the back can recline.
Full Specifications
Every detail, measured and listed
| Type | Racing-style gaming chair |
|---|---|
| Color | Black with white trim |
| Upholstery | Faux leather (pleather) with polyester fill |
| Frame | Plastic |
| Weight capacity | 250 lb |
| Overall dimensions | 26 in W x 26 in D x 51.5 in H |
| Seat | 20 in W x 20 in D |
| Back | Reclining, with tilt mechanism |
| Pillows | Head pillow and lumbar pillow |
| Height adjustment | Gas lift |
| Base | Five wheels |
| Footrest | None |
| Chair weight | 40 lb |
| Assembly | Required, tools included |
| MPN | GF-2101 |
FAQs
Common questions that customers ask
Does the GameFitz GF-2101 have a footrest?
No. The GF-2101 has no footrest. It includes a head pillow and a lumbar pillow, and the back reclines.
What is the weight capacity?
The chair holds up to 250 pounds.
Does it recline?
Yes. A tilt mechanism lets the back lean away from the desk for a break.
Is assembly required?
Yes. It ships in parts with the hardware, tools, and an instruction manual. The finished chair weighs 40 pounds.
How fast will it ship and can I return it?
Orders ship to the 48 contiguous states and process within 2 business days. If it is not right, you have 30 days from delivery to return unused items in the original packaging.
Outfit the setup
Call out plays on a GameFitz headset
GameFitz Wired Stereo Gaming Headset for PlayStation, Xbox One & Switch, Black
$23.99
Stay cool with a quiet clip-on fan
Optimus F-0645A 6-Inch 2-Speed Convertible Clip-On & Table Fan – White Whisper-Quiet Personal Fan
$46.99
GameFitz builds gaming chairs, controllers and chargers for players who want the setup to perform. The GF-2101 is the no-footrest racing frame: a high back that reclines, a head pillow and a lumbar pillow placed where the neck and lower back tire first, a 20 by 20 inch seat on a gas lift, and a 250 lb rating.
Lock in the compact setup
Fast shipping. 30-day returns. Black and white trim, two support pillows, rated to 250 lb.
